KGB100DB technical parameter | ||
Basic Specifications | Unit | Fixed open and close mold |
Using raw materials | PE.PP.ABS.. | |
Maximum product volume | L | 30 |
Empty loop | PC/HR | 650&2 |
Machine Dimensions (L&W&H) | M | 6.4&6.2&4 |
Mechanical weight | T | 23 |
Mould opening and closing system | ||
Clamping force | KN | 200 |
Template size | MM | 790&865 |
Mould opening and closing stroke | MM | 350-850 |
Die transfer stroke | MM | 1490 |
Max Die Size (W&H) | MM | 590&860 |
Die thickness | MM | 360-420 |
Power | ||
Servo oil pump motor power | KW | 15 |
Servo oil pump displacement | L/MIN | 80 |
blowing pressure | MPA | 0.8 |
Gas consumption | M3/MIN | 0.7 |
Cooling water pressure | Mpa | 0.3 |
water consumption | L/min | 70 |
Average energy consumption | KW | 52-60 |
Extrusion system | ||
Screw diameter | MM | 100 |
Screw aspect ratio | L/D | 24 |
Plasticizing capacity (HDPE) | KG/H | 160 |
Number of screw heating sections | ZONE | 4 |
Screw heating power | KW | 22.4 |
Screw fan power | KW | 0.5 |
Extrusion motor power | KW | 55 |
Die head | ||
Die head heating zone segment number | ZONE | 5 |
Single die head heating power | KW | 22.8 |
Maximum die diameter | MM | 250 |
Storage tank volume | L | 5 |
Accumulator weight | KG | 3.75 |
Basic configuration:
Electronic control system: Japan's Mitsubishi PLC microcomputer control + large-screen Chinese and English man-machine interface, all-round realization of process parameter setting, retrieval, monitoring, fault diagnosis; Mitsubishi 4AD temperature control module, integrated and precise control of temperature changes, reliable performance, long lasting;
Hydraulic system: German DMASS servo system + Japanese Sumitomo pump, equipped with Japanese YUKEN hydraulic components, proportional pressure control, the whole machine operates smoothly, responds quickly and efficiently, and reduces equipment energy consumption and noise significantly;
Mold opening and closing system: fixed mold opening and closing + ball linear guide rail + beam wall cylindrical shaft + center mold clamping, with high-precision rack and pinion, to ensure efficient and stable mold opening and closing; large oil cylinder pressurized mold clamping to ensure greater locking mold force;
Extrusion system: hard tooth surface reducer + American ETD frequency converter + Siemens motor + special optimized screw for blow molding, to ensure the plasticization of various raw materials, ensure the screw extrusion volume per unit time, efficient and stable speed regulation, low noise, high efficiency and energy saving ;
Die head system: made of special steel, optimized flow design, center feeding extrusion die head, eliminating the convergence line and improving the product performance of the blow molding machine;
Wall thickness system: Japanese MOOG 100-point wall thickness controller + independent small oil source + MOOG servo valve, using the most advanced product surface thickness controller in China, the control accuracy is 0.05-20MM, and the precise control of various products is realized.